Q: What can I do if the cartridge print nozzles are clogged?
A: Uneven printing, skipping, or no print may suggest clogged print nozzles. If a cartridge has been left, unused or stored for a long period of time, its print nozzles may become blocked with old dried ink. One method is to allow the print heads to flush by ink fully, this should help unclog the print nozzles and restore print quality.
Q: Are the colors the same as the original?
A: For all practical purposes, yes. If there are slight variations in color, they can be adjusted through software.
Q: How to use limitation in proper way?
A: 1. The lamination should be well-proportioned brushed or sprayed on the substrates, once you fund the viscosity is too high to coating on, mix with some alcohol or pure water (0~50%), churn well before use.
2. The protection effect depends on how dry the lamination coatings. Half dry or un-welled dried coated PVC may disable in humid and raining environments, such as coating falling off and faintness. The water based lamination is environmental friendly liquid, can mixed with water, but it only functional after the lamination completely dry. Be careful in Summer and in raining season, dry it with heater if necessary.
3. The quality of the substrate also the key reason to influence the effect of the lamination. The above conclusion based on the testing experience on the substrate from 3M and Hanwha Chemical. The other substrates may have different ingredient like CaCo3 , we suggest you test it well before use.
Q: What is printer ink refill?
A: This is a process by which you refill your OEM cartridge with printer ink purchased saparately as a printer ink refill kit. This is the cheapest alternative to the OEM cartridges. The process is simple, you buy a bottle of printer ink along with a kit which includes instructions to refill the ink. Each bottle can provide multiple refills. The process may sound messy but its worth the affort. |
